Last Supper FSL Banner

The parts of the Last Supper FSL Banner are embroidered as regular FSL. You can read about this in our General Guidelines.

Some points to remember from the General Guidelines:
Use Vilene water soluble stabilizer;
Use the same thread for the upper and bobbin to get two-sided embroidery.
DO NOT embroider several designs in one hoop.

The finished size of the banner is about 24". You will need: embroidery thread, water-soluble Vilene stabilizer and an satin ribbons.
To embroider this banner we used 40-weight polyester embroidery threads; you can also use rayon embroidery threads.

Step One: Embroider each part of the banner. Cut away the stabilizer leaving about 3/4". Place the designs in a row, aligning their edges. Secure with pins.

Step Two: Machine-stitch all parts together using short but not dense zig-zag. Use invisible thread.

Step Three: Now rinse the stabilizer and leave to air dry. Then press with steam.

Insert the ribbon into the side loops to hang the banner.