Menu
Available in 3 sizes: for large 130 x 180 mm (5" x 7"), small 100 x 100 mm (4" x 4") and mega 160 x 260 mm (6" x 10") hoops
Large Hoop
Size: 128mm x 151mm (5.12" x 6.00")
Stitches: 23525
Colors: 4
Size: 127mm x 128mm (5.08" x 5.10")
Stitches: 22806
Colors: 5
Small Hoop
Size: 85mm x 99mm (3.4" x 3.96")
Stitches: 20744
Colors: 4
Size: 98mm x 99mm (3.89" x 3.90")
Stitches: 20905
Colors: 5
Mega Hoop
Size: 149mm x 175mm (5.87" x 7")
Stitches: 26593
Colors: 4
Size: 149mm x 148mm (5.87" x 5.88")
Stitches: 25310
Colors: 5
Designs for mega hoop available only in DST, HUS, JEF+, PES and VP3 formats!
This set of machine embroidery designs is part of our Halloween collection. It uses the Lace technique. The designs is available for the Large hoop (5" x 7"), Mega hoop (6" x 10") and Small hoop (4" x 4").
To embroider this design, hoop the fabric with 2 layers of water soluble mesh. Start embroidering. The machine will embroider the outline of the design and stop.
Take the hoop from the machine. With a pair of sharp scissors cut away the fabric. The areas of fabric inside the outlines.
Return the hoop to the machine. Embroider the pumpkin.
After the machine stops, change the thread. Embroider the leaves.
The machine will stop again. Change the thread and embroider the hat.
Change the thread again and finish the embroidery. Wash away the stabilizer and leave to air dry. Press with steam.
If you're embroidering the doily, return the hoop in the machine. It will embroider the outline and stop. Cut away the fabric around the outline.Then finish the embroidery
Shopping Cart
Check Out
