Menu
This design was made in 2 versions, one as a beautiful doily, the other has no frame. They are not identical in size and proportion.
Available in 3 sizes: for large 130 x 180 mm (5" x 7"), small 100 x 100 mm (4" x 4") and mega 160 x 260 mm (6" x 10") hoops
Size: 128mm x 132mm (5.11" x 5.26")
Stitches: 24999
Colors: 1
Size: 129mm x 129mm (5.09" x 5.09")
Stitches: 27612
Colors: 2
Size: 96mm x 99mm (3.8" x 3.9")
Stitches: 22174
Colors: 1
Size: 99mm x 99mm (3.9" x 3.9")
Stitches: 22961
Colors: 2
Size: 149mm x 153mm (5.87" x 6.04")
Stitches: 27612
Colors: 1
Size: 149mm x 148mm (5.87" x 5.87")
Stitches: 27658
Colors: 2
Design for mega hoop available only in DST, HUS, JEF+, PES and VP3 formats!
This set of machine embroidery designs is part of our Halloween collection. It uses the Lace technique. The designs is available for the Large hoop (5" x 7"), Mega hoop (6" x 10") and Small hoop (4" x 4").
To embroider this design, hoop the fabric with a layer of water soluble mesh. Start embroidering. The machine will embroider the outline of the design and stop.
Take the hoop from the machine. With a pair of sharp scissors cut away the fabric. The areas of fabric which are meant to be removed are darkened in the picture.
Return the hoop to the machine and finish embroidering.
If you're embroidering the doily, return the hoop in the machine. It will embroider the outline and stop. Cut away the fabric around the outline.
Wash away the stabilizer and leave to air dry.
Press with steam.
Shopping Cart
Check Out
