Menu
These are instructions on how to embroider the Celtic Cutwork Lace Insert.
The design is available in 2 sizes - for mega and commercial size hoops.
 |
Mega Hoop: Size: 122 x 250 mm (4.69" x 9.62") Commercial Hoop: Size: 145 x 299 mm (5.58" x 11.5") |
You will need fabric, water soluble mesh and embroidery threads. 40-weight embroidery polyester threads are preferred for the project.
Cotton thread is not suitable because the embroidery will be too bulky.
Rayon thread is sensitive to the chemicals in the water-soluble mesh and will not work for the project.
Please note: ALWAYS make a test stitch-out on scrap before you make a stitch-out on the real item.
Step One: To embroider the design, hoop the fabric with a layer of water soluble mesh. Start embroidering. The machine will embroider the outline of the design and stop.
Step Two: Take the hoop from the machine. With a pair of sharp scissors cut away the fabric. The areas of fabric which are meant to be removed are shown in the below pictures.
Step Three: Return the hoop to the machine. Change the thread if needed. The cut-out parts will be filled with embroidery. The raw edges will be finished.
Step Four: Wash away the stabilizer and leave to air dry.
We decorated the back of a summer top with the design.
Shopping Cart
Check Out
