Baltimore Album Quilt. Block 2: Poppy Garland

These are instructions on how to embroider and make the Poppy Garland Block.

There are 4 designs in the set, all of which fit a large hoop (130 x 180 mm or 5" x 7"). The designs are emboidered separately and sewn together.

The finished size of the block with the applique embroidery is about 10"-12", depending on the space you wish to leave around the embroidery.

The designs have a blanket stitch finish.

The top design and its mirror image: Size: 116 x 123 mm Stitches: 9372 Colors: 5

The bottom design and its mirror image: Size: 128 x 126mm Stitches: 11617 Colors: 4

You will need base fabric, fabric for the applique, light-weight stabilizer, embroidery threads, machine quilting cotton threads and temporary fabric adhesive in a stick.

All designs are embroidered in the same way.

Step One: Hoop the base fabric stabilized with the stabilizer needed for your project. We used light-weight cut-away stabilizer.

Upload the file into your machine. Start embroidering. The machine will embroider the outlines of the flowers and stop.

Step Two: Place a very small amount of the fabric glue inside the shapes. Cover the shapes with a red piece of fabric, press a little with the tips of your fingure so that the applique fabric adheres to the base and does not shift during the next step. Start the machine.

The machine will embroider the same shapes over the applique fabric and stop.

Step Three: Take the hoop from the machine. With a pair of sharp scissors cut away the fabric around the shape as close to the stitches as possilbe. Return the hoop to the machine.

Step Four: Return the hoop to the machine and embroider the next shape - stem and leaves.

Step Five: Place a very small amount of the fabric glue inside the shape. Cover it with a piece of applique fabric. Start the machine.

The machine will embroider the same shape over the applique fabric and stop.

Step Six: Take the hoop from the machine. With a pair of sharp scissors cut away the fabric around the shape as close to the stitches as possible. Return the hoop to the machine.

Step Seven: Return the hoop to the machine and embroider the next shape - flower centers.
Place a small amount of glue inside the shapes.

Cover it with pieces of applique fabric. Start the machine.
The machine will embroider the same shape over the applique fabric and stop.
Cut away the excess fabric around the shapes.

Step Eight: Return the hoop to the machine and embroider the next shape - flowers lower petals.
Place a small amount of glue inside the shapes.

Cover it with pieces of applique fabric. Start the machine.
The machine will embroider the same shape over the applique fabric and stop.

Cut away the excess fabric around the shapes.

Step Nine: Return the hoop to the machine and let it finish the raw edges. Change threads when needed. The designs have a blanket-stitch finish. We recommend to use cotton machine quilting threads for the finish.

Blocks Assembly

To make a block, you will need to embroider each design from the set.

When you have all 4 parts embroidered, take one part at a time, place it on a cutting mat, align your ruler along the embroidered lines and cut.

First sew both upper and lower quarters together. Seam allowance is 1/4". Press the seams open.

Now sew the left and the right strips together. Press the seam open.

Trim the block to the size you need.

Happy Embroidering!

Back to the Baltimore Albumn Quilt - Block 2: Poppy Garland