Teddy Bear Cookie Cutter Applique Set

These are instructions on how to embroider the Teddy Bear Cookie Cutter Applique Set.

You will need fabric for the applique, embroidery stabilizer (the type will depend on your project) and embroidery threads.

Step One: Stabilize the base fabric and hoop it. Upload the "Girl" file into your machine. Start embroidering. The machine will embroider the outline of the design and stop.

Step Two: Cover the outline with fabric and start the machine. The machine will embroider the outline of the teddy and stop.

Step Three: Take the hoop from the machine. With a pair of sharp scissors cut away the fabric outside the outline as shown on the picture.

Step Four: Place a piece of fabric on the lower part of the body to make the skirt. Start the machine. It will embroider the outline of the shirts and stop.

Step Five: Cut away the fabric around the outline.

Step Six: Place a piece of fabric on the upper part of the body to make the T-shirt. Start the machine. It will embroider the outline of the shirt and stop.

Step Seven: Cut away the fabric around the outline.

Step Nine: Return the hoop into the machine and finish embroidering the raw edges of the applique, and the face features. Change threads each time the machine stops.

To embroider the "Boy" file, upload it into the machine. Go through the Steps 1 through 3.

Step Four: Place a piece of fabric on the body to make the jumper. Start the machine. It will embroider the outline of the jumper and stop.

Step Five: Neatly cut away the fabric around the outline.

Step Six: Return the hoop to the machine and finish embroidering the raw edges of the applique, and the face features of the Teddy. Change threads each time the machine stops.

Happy Embroidering!

Back to the Teddy Bear Cookie Cutter Applique