Menu
These are instructions on how to embroider the FSL Applique Lace Daisy Border designs. The border is split into 2 parts. The designs are available in 2 sizes for the large (5" x 7") and mega (8" x 10") hoops.
On the photo you can see a placemat and a doily with the motifs for the large and mega hoops.
One of the advantages of the design is that you embroider each pattern separately and then incorporate them into a larger project - this means you don't risk ruining your project if something goes wrong during embroidery.
You will need fabric for the applique, water soluble mesh and embroidery threads.
Step One: Hoop 2 layers of water soluble mesh. Upload the first file into your machine. Start embroidering. The machine will embroider the outline of the design and stop.
Step Two: Cover the outline with fabric and start the machine. The machine will embroider the outline of the lace and stop.
Step Three: Take the hoop from the machine. With a pair of sharp scissors cut away the fabric in the areas shown on the picture.
Step Four: Return the hoop to the machine and finish embroidering.
Step Five: Repeat Steps 1 through 4 for the second file.
Step Six: Neatly cut away the excess stabilizer around the parts. Position the parts together and using the same threads with withich you made embroidery hand-stitch the parts together.
Wash away the remaining stabilizer, neatly spread on a flat surface and leave to air dry. Press if needed.
Read about the placemat and the doily on the project page Placemat and Doily with FSL Applique Daisy Border.
Shopping Cart
Check Out
