|
This blouse will fit the American Girl Doll and similar dolls of 18-inch height. The Lace Blouse is a set of 6 Free-Standing Lace machine embroidery designs.
|
|
| You will need Vilene water-soluble stabilizer, polyester or rayon embroidery threads for the blouse, and 50- or 60-weight cotton embroidery threads for the ruffles, three small buttons or beads, and small embellishments (optional). |
|
| We have General Guidelines on how to embroider freestanding lace and General Guidelines on how to embroider crochet-style freestanding lace in our tutorial section. If you never worked with our FSL designs before, please read the tutorials, this might be helpful. |
|
Some points to remember from the General Guidelines:
Use Vilene water soluble stabilizer;
Use the same thread for the needle and bobbin.
DO NOT embroider several designs in one hoop.
Make sure you use a sharp needle. |
|
| Embroider the blouse with the polyester or rayon embroidery threads. Embroider the ruffles with 50- or 60-weight cotton embroidery thread. It's possible to embroider the ruffle with polyester or rayon. However, in this case, you should use a 40- or 50-weight bobbin thread with a matching color that does NOT have a sheer finish. Cotton or spun polyester (with a matte finish) may be suitable. |
|
| Please read about the Skirt in the Hoop for 18-inch dolls. |
|
|
You can purchase the skirt and the blouse together at a 25% discount.
|
|
|
Menu
Shopping Cart
Check Out
